Articulated backhoe loader NK862
Backhoe loader NK862 characteristics
◎DEUTZ engine provides strong power and low fuel consumption
◎It is equipped with the driving & steering front axle, maintenance-free wet-type unilateral braking rear axle and four-speed synchronous shift gearbox designed and manufactured specially by CARRARO; its forward and backward directions are switched by electric hydraulic control.
◎Tool carrier loader linkage provides multi-functions and flexibility◎The excavator working device can rotate 180 degrees along the gyration center at the back of the frame. The H-shaped leg and the side-shift excavator can excavate along the wall and are featured in strong working stability, wider working range and higher efficiency.
◎Its chassis is an integral type special chassis featured in strong rigidity, impact resistance and compact size.
Backhoe loader NK862 main specification
Digging reach at ground level (mm) |
5390/6485 |
|
Dump height (mm) |
2550 |
Max. digging depth (mm) |
4268/5430 |
|
Discharge (°) |
45 |
Max. Working height (mm) |
3645/4385 |
|
Dump reach (mm) |
774 |
Max. Dump clerance (mm) |
1562/2506 |
|
Lift capacity to full height (kN) |
25 |
Bucket dig force (kN) |
57 |
|
Bucket breakout force (kN) |
40 |
Bucket capacity (m3/yd3) |
0.2 |
|
Bucket capacity (m3/yd3) |
0.9 |
Engine |
Emission Regulation |
Stage II |
|
Make |
WEICHAI DEUTZ WP4G95E221 |
Rated Power/Rated Revolution(kw/rpm) |
70/2200 |
|
|
|